Warranty And Maintenance / Disposal - Medela Symphony Manual De Instrucciones

10. Warranty and maintenance / disposal

Warranty and maintenance
39
Three-year warranty for the unit from the date of purchase, excluding pump set and
accessories. Six month warranty for the batteries. The manufacturer is not liable for any
damage or consequential damage caused by incorrect operation, inappropriate usage
or use by unauthorised persons. Routine checks, servicing and battery exchange may
only be carried out by Medela authorised personnel.
The engineering of the Medela Symphony breast pump has been verified by indepen-
dent test institutes for compliance with the EN/IEC 60601-1 standard. Copies of such
certificates may be obtained on request. Because of the method of construction used,
Medela does not expect electrical safety to be affected at any time during the life of the
product – provided that it is used properly in accordance with its intended use as well
as these instructions for use, and that the device is serviced and repaired at an
authorised service centre. There are no prescribed or recommended electrical safety
checks or recurrent tests to be carried out.
Manufacturer's information provided in accordance with EN/IEC 62353:2014 "Medical
electrical equipment – Recurrent test and test after repair of medical electrical
equipment".
Besides the cleaning procedure(s) described in chapter 5 and battery charging for
pumps with optional batteries as described in chapter 6, no further maintenance is
required. Besides the inspection procedures described in chapter 3, e.g. visual signs of
damage to the pump or power cord, pump dropped or dropped into water, no further
inspections are required. As pointed out in chapter 3, service and repair may be
performed only by an authorised service agency (centre) in full accordance with the
Symphony Service Manual using original Medela spare parts mentioned therein. The
service manual, wiring diagrams, and descriptions are available upon request from
Medela.
Medela deems that the final production testing replaces on-site testing of the device
before putting into service.
The service life of the device is seven years, including the life of the internal batteries.
The service life of the accessories is two years.