C2 - Installing; D- Technical Features; Outdoor Station - SCS Sentinel 32068 Instrucciones De Uso E Instalación

C2- Attaching and connecting the elements
• Attach the outdoor station at a height of 1.5 metres mounted on a flat wall back plate.
• Installation under a porch or a covered area is highly recommended.
• Remove the top from the panel, slightly lift then slide off the front panel.
• Connect the outdoor station wire (as shown in the diagram below) and insert the outdoor station onto its support.
• Connect the interior unit.
• Attach the interior unit at a height of 1.5 metres on a flat wall. First fit the rear plastic support, connect the wires
and place the handset on its support.
• Perform functional test before finalizing fixing of the elements.
• After installing and testing, place a clear silicon seal on the top and sides of the outdoor station (not on the
bottom) to avoid any risk of infiltration.

D- TECHNICAL FEATURES

D- TECHNICAL FEATURES

Outdoor station

Installing
Facade
Control of a strike or electric lock
Dimensions
Phone
Installing
Wiring
Maximum wiring distance
Used
Dimensions
8 EN
Back plate outdoor station
187
wall-mounted
aluminium
12VDC /1,2A max
100 x 197 x 27 mm
wall-mounted
0-50 meters: 0.75 mm ² cable (not supplied)
from 51 to 100 meters: 1 mm ² cable (not supplied)
100 m
only indoors
98 x 214 x 40 mm
96