Mounting Bracket; Interconnection - Siemens milltronics TASS Manual De Instrucciones

Mounting Bracket

66 mm
(2.6")
53 mm
(2.09")

Interconnection

All wiring must be done in conjunction with approved conduit, boxes, and
Note:
fittings and to procedures in accordance with all governing regulations.
Ensure that there is sufficient slack in the cabling to allow the TASS arm to pivot freely so
the wheel rides on the belt. Restriction of the arm can cause slippage or excessive
contact between the belt and the wheel.
Connection
Page 4 TASS Speed Sensor – INSTRUCTION MANUAL
20mm
(0.79")
60 mm
(2.36")
48 mm
(1.89")
TASS
brown excitation (+15 V DC)
black signal
blue common
9 mm (0.35"), 2 places
6 mm (0.24"), 2 places
12 mm (0.48"), 2 places
Integrator
25 mm
(0.98")
7ML19985HL61