Mounting - Siemens milltronics TASS Manual De Instrucciones

Mounting

The TASS speed sensor attaches to the static beam of the associated belt scale, or to a
structural cross member via a pivot and bracket assembly.
Do not allow the slope of the TASS arm to exceed 45° below the belt stringer line.
Ensure that the wheel is in contact with the belt at all times.
Note:
Location
Locate the TASS near the scale assembly to simplify wiring. The wheel should ride on the
return belt, either just before or just after a return belt idler.
7ML19985HL61 TASS Speed Sensor – INSTRUCTION MANUAL
TASS
Milltronics belt scale
Page 5