Function And Application; Transport And Storage; Safety Conditions - Festo DSMI B Serie Instrucciones De Utilizacion

DSMI−...−B
2

Function and application

When the compressed air ports are pressurised alternately, the inner vane in
the housing swivels backwards and forwards. This swivel movement is transmitted
to the outer stop lever and the drive shaft as a rotary movement. The angle of
rotation can be limited by means of adjustable stops and adjustment sleeves for
the stop lever. To use the DSMI as a measuring cylinder, the adjustment sleeve in
the shock absorber retainer can be replaced with cushioning components (elasto
mer shock absorbers or shock absorbers).
The pneumatic DSMI swivel module was designed for rotating or swiveling work
loads which do not have to carry out a complete revolution.
The integrated measuring system was designed for monitoring the swivel position
in combination with a positioning controller from Festo (e.g. CMPX, CMAX,
SPC200, SPC11 Soft Stop") or for use as a measuring cylinder.
If it is used as a measuring cylinder, the compressed air will need to be throttled
(e.g. using one−way flow control valves).
3

Transport and storage

Take the weight of the DSMI into account:
S
It weighs up to 4 kg.
Ensure the following storage conditions:
S
Storage times should be kept to a minimum
Cool, dry and shaded storage locations protected from corrosion.
4

Safety conditions

For electronically closed−loop control of the DSMI in combination with a
positioning controller:
Note
Special conditions apply to the electronic regulation of the DSMI.
S Note the warnings and instructions in the descriptions of the positioning
controller.
Festo DSMI−...−B 0806NH English
25