Preventive Maintenance; Daily Maintenance; Weekly Maintenance - Tomahawk IC3 Manual Del Usaurio

PREVENTIVE
MAINTENANCE
WARNING!
REGULAR MAINTENANCE MUST BE PERFORMED ON THE TOMAHAWK IC3 INDOOR CYCLE
FOR OPTIMAL PERFORMANCE AND LONGEVITY.
Please read and follow all instructions below. If the indoor cycle is not maintained as described,
components may wear excessively and the Tomahawk IC3 Indoor Cycle may become
damaged. Improper maintenance will void the warranty terms. If you have questions about
maintenance, contact your local distributor or refer to www.indoorcycling.com.
NOTE: MANY MAINTENANCE PROCEDURES REQUIRE LUBRICANT SPRAY.
MANUFACTURER RECOMMENDS BRUNOX OR ANY OTHER SOLVENT-FREE LUBRICANT.

DAILY MAINTENANCE:

1. Make sure that the Tomahawk IC3 Indoor Cycle is level. If the Tomahawk IC3 Indoor Cycle
rocks on your floor, turn the leveling feet underneath the front or rear stabilizer until the
rocking motion is eliminated (see „How to move the Tomahawk IC3 Indoor Cycle" on page 12).
2. After each user finishes exercising, the Tomahawk IC3 Indoor Cycle should be disinfected
and cleaned to maintain a hygienic environment. First, apply a disinfectant spray to the
handlebars and the saddle. Using a lint-free cloth, dry the handlebars and the saddle. Next,
apply a small amount of disinfectant to a lint-free cloth and clean the adjustment knobs and
the lock
handles. Avoid using strong detergents on the Tomahawk IC3 Indoor Cycle frame.

WEEKLY MAINTENANCE:

1. Apply a small amount of the lubrication spray to a lint-free cloth. Thoroughly clean the
frame, the handlebar slider, the seat sliders, the flywheel, and the plastic parts of the Tomahawk
IC3 Indoor Cycle.
2. For optimal performance of the resistance
system, and to minimize wear on the brake
pad, the acid-, silicone- and solvent-free
spray lubricant should be applied to the
brake pad using the lubrication holes on the
plastic part of the brake pad. If fuzz or lint
appears on the brake pad, the brake pad has
become too dry. Lubricant spray should be
applied more frequently. Make sure brake
pad is thoroughly soaked from end to end
with lubricant spray. aWipe off any excess.
Version 1.1 2014 IC-TKIC3B-01 Copyright by Indoorcycling Group GmbH 2014 | www.indoorcycling.com