Baxtran TC30 Manual De Usuario página 18

User's manual. Weighing indicator, counting function TC30
Note: it allows only one time accumulation with one weighing action, next accumulation will be
allowed with next weighing action after the weight value is less than 20d.
5. Counting operation
a. Unit weight input:
put the sample on the weighing platform, and it will be more accurate with more samples (but the
quantity of samples can't exceed 9999 pcs). Then input the amount of the samples, example: there
are 123 pcs samples, press
b. Unit weight memory:
press the digits buttons for long time to memorize the present unit weight. Example: if the unit weight
entered just now needs to be memorized at 2 button, press
release after the display twinkled, the unit weight was memorized at 2 button. 10 unit weights can be
memorized at maximum, i.e, from 0-9.
c. Unit weight retrieve:
press the corresponding digit button to retrieve the memorized unit weight, and then press
Example: press ,
d. Accumulation and erase:
press , button, the first line will display accumulated weight, and the second line displays the
accumulation times, the third line displays accumulated amount. Press
this time, and press to quit.
6. Micro-printer connecting
When the indicator connected with the serial printer, the cables need to be connected as follows:
9-pin connector
Note: please set the communication address parameter to be as Adr=01 and the baud rate to be as
b=2400 before connecting the printer with the indicator.
7. Operation of the serial printer:
a. Weighing bill printing:
In the weighing mode, when the weight value >20d and the display stable, press
ter will print the weighing bill, (the second printing can be available after the weigh value <20d).
Counting mode:
N0: 0012
Gross: 52.01
Tare: 2.01
Net: 50.00
U/W: 21.322
C: 2354p
b. Accumulating print:
In weighing mode, press
data, press to quit.
Counting mode (A. = accumulation):
N0: 0018
W: 6215.72 (A. weight)
C: 891313p (A. amount)
8. Battery volume:
When the power on or off, the Pbt85
, , , .
to retrieve the unit weight in digit 5.
Indicator
TXD
3
GND
5
(TIMES)
(G.W)
(T.W)
(N.W)
(WT/1000 pcs)
(QTY)
, button and then press
(A. times)
meaning there left 85% power consumation still.
button for about 2 seconds, then
to erase accumulation at
Micro-printer (with serial output interface)
25-pin connector
2
7
, the printer will print the accumulating
ENG
button.
button, the prin-
17