Cebora SYNSTAR 270 T SRS edition Manual De Instrucciones página 26

• Languages. Language selection.
Turn knob 2 to select the function and confirm the se-
lection by holding down the knob.
To confirm the language simply hold down knob 2.
To exit the function press the key
• Measurement unit
Choosing between metric and imperial systems.
• USB Port Function.
This function is activated only when a USB key is plug-
ged into connector 6.
Turn knob 2 to select the function and confirm the se-
lection by holding down the knob.
To confirm the selection simply hold down knob 2.
To exit the function press the key
• Use PIN
A lock code can be used to stop the use of PROCES-
SES, MATERIALS and PARAMETERS.
26
G
Job Menu.
JOB
In this section you can save, call up, restore, copy or can-
cel the working programs.
Saving a "JOB" program.
After finding the ideal welding condition to be saved,
press key, the screen displays the first available
job number; to confirm the selection press key SAVE .
The saved string shows the process, the type and the
diameter of the wire. Before saving the working program,
you can select a number to save it under by simply turning
knob 2 to the selected number. The job screen shows the
key SAVE and two additional keys COPY and
. Press the first button to copy and save any job program
and save it again under another number. Use the "del"
button to delete any saved job program.
Press key JOB to open a screen with all the saved job
programs. Press key RCL and key OK to call up any
program from the memory and modify it.
JOB
1
The key with the selected program number is di-
splayed on the main screen; turn knob 2 to recall all the
saved job programs one by one in order to modify them.
• Information
• Lock
This function inhibits the use of some functions:
welding processes, materials, settings and use of jobs
H
Presence of accessory, cooling unit (optio-
nal).
DEL
The display shows: Machi-
ne item number, serial num-
ber, firmware version,
firmware development date
and release number of the
synergic curve table and
the installed options.