Chauvin Arnoux Multimetrix SL 105 Manual De Instrucciones página 9

English
General Instructions (cont'd)
Maintenance
Metrological
verification
Case cleaning
Installing a battery
Storage
Unpacking
Repacking
Sound Level Meter
It is essential that all measuring instruments are regularly calibrated.
For checking and calibration of your instrument, please contact our
Agent in your country.
Use a damp cloth to clean the exterior housing, ensure no water or soap
is allowed inside the meter.
The meter uses a 9-volt battery. For the longest life and best
performance, we recommend an alkaline battery.
•
Open the battery compartment located at the back of the Sound
Level Meter.
•
Insert a battery into the compartment as indicated by the polarity
markings (+ and -) marked inside.
If the meter must not be used for periods longer than a week, remove the
battery and store it separately.
All equipment has been mechanically and electrically checked before
being dispatched.
However, it is wise to check briefly that equipment was not damaged
during transport.
If so, please contact our Marketing Department as soon as possible and
claim carrier legal reserve.
If the equipment is being sent back, please preferably use original
packaging and indicate as clearly as possible the reasons for sending it
back on a note enclosed with the equipment.
9