Spare Parts - HTL CLINIPET+ Manual Del Usario

10 - SPARE PARTS

Fig. 4, 6 show the pipette design and its ele-
ments.
Replacement parts are marked with bold type-
faces.
1. Pipetting pushbutton
2. Ejector pushbutton
3. Body cover
4. Handle cover
5. Handle
6. Body
7. Ejector spring
8. Plunger
9. Plunger spring
10. Pressure plate
11. Pressure sleeve
12. Gasket
13. O-ring
14. Nut
15. Shaft
16. Ejector
17. Pressure sleeve spring
18. Calibration key
All the spare parts indicated in Fig. 4, 6 can be
ordered from your HTL representative (type of
pipette and name of the part for this pipette
schould be specified).
Warning: The replacement of the plunger
requires conducting of calibration proce-
dure according to section 5.
All rights reserved. Product described in this manual is sub-
ject to availability and technical modification. Errors excepted.
PZ HTL S.A. reserves the right to improve, enhance or other-
wise modify its products without prior notification.
© 2015 PZ HTL S.A.
13
ENGLISH
14