Technical Data; Maintenance And Care - Stanley SP5 Manual De Instrucciones

The SP5 has also been tested and complies with the CE certification require-
ments set forth in the EC regulations 89/336/EEC and EN 61000-6-1 (EN50082-
1), EN 61000-6-3 (EN50081-1) and IEC 60825-1.

TECHNICAL DATA

ACCURACY:
VISIBILITY RANGE:
SELF-LEVELING RANGE: +/- 5° in any direction
INDICATING LIGHTS:
POWER:
LASER OUTPUT:
LASER CLASS:
WEIGHT:
UNIVERSAL BASE

MAINTENANCE AND CARE

The SP5 is not waterproof. Do not allow the unit to get wet. Damage to
internal circuits will result.
Do not leave the SP5 out in direct sunlight or expose it to high temperatures.
The housing and some internal parts are made of plastic and may become
deformed at high temperatures.
Do not store the SP5 in a cold environment. Moisture will form on interior
parts when warming up. The moisture could fog up laser windows and cause
corrosion of internal circuit boards.
When working in dusty locations, some dirt will collect on the laser
windows. Remove any moisture or dirt with a soft, dry cloth. Do not use
aggressive cleaning agents or solvents.
Store the SP5 in its case when not in use. Remove batteries before storage
of the instrument.
+/- 6 mm at 30 m
up to 30 m, according to the light conditions
Low power: Laser blinks 4x every 8 seconds
Out of level: Laser blinks quickly
3 "AA" batteries 1,5 V
5 laser diodes, 650 nm.
0.7-1.0 mW each for class 2M;
Class 2M
545 g with batteries
200 g
SP5 • 9