4moms self-installing car seat Manual De Instrucciones página 25

5
Grasp the base near the belt path and press down firmly to allow the
LATCH belt to tighten. The LATCH belt will retract automatically. Installation
is complete when you push hard and no longer hear a clicking noise.
6
48
LEVEL LINE
Level line should be
parallel to the ground.
If not, re-adjust level.
less than
1 in.
7
Using one hand, check that base moves less than 1 inch
side to side or front to back at the rear of the base.
49
Manual Base Install with LATCH System