Roughing-In Reference - Jacuzzi COMFORT PLUS Serie Manual De Instalación Y Operación

ROUGHING-IN REFERENCE

Note: 1. Baths shown are left-hand unless otherwise specified. Right-hand is a mirror image.
2. Some units have been provided with cutout templates included in shipping carton.
See CUTOUT information for each model on page 1 and 2.
3. THE OVERALL DIMENSIONS ARE NOMINAL WITH A TOLERANCE OF +0 AND -1/4".
4. Measurements inside each unit represent cutout in floor to allow for drain/overflow.
5. All measurements are in inches. To convert to millimeters, multiply inches by 25.4.
18''
36''
2''
14''
AMIGA PLUS
42"
5"
4-1/4"
(Right hand only.)
SIGNA 5 PLUS
*Add 1/4" to this dimension when roughing-in for 3-wall niche.
ROUGHING-IN REFERENCE
3"
11"
(Right-hand only.)
LUNA PLUS
CUTOUT- CORNER BATH
58"
(1473 mm)
59"
Ref.
25-1/2"
(648 mm)
45-9/16"
(1157 mm)
CUTOUT
TARA PLUS
(RECTANGULAR)
72''
16'' x 4''*
(Left hand only)
60"
13" x 5"
12"
30"
(OVAL AND CORNER)
72"
13" X 6"*
42"
36"
58"
(1473 mm)
25-1/2"
(648 mm)
17-3/8"
12" x 4"*
9"
(Left hand shown. Right hand is mirror image.)
CETRA 536 PLUS WITH INTEGRAL SKIRT
18-1/2" x 5"*
42"
11 -1/4"
5"
(Right hand only.)
SIGNA 6 PLUS
60"
61-5/8"
Ref.
14" x 4"*
27-1/4"
46"
35"
- 2" x 4" Stud
(Right hand only)
TARA PLUS
Corner Baths with Skirt
If an optional skirt is used on a corner bath, additional support is
necessary in the front of the unit. Measure the height from the floor
to the underside of the bath rim. Cut two 2" x 4" studs, apply adhe-
sive to both ends and install.
SUPPORT FOR CORNER BATHS
APPLY
ADHESIVE
2" x 4" STUD
3
Jacuzzi Whirlpool Bath
*60"
36"
72"
12-1/2"
36"
60"
27-1/4"
35"
44"
H
© BP43000 2/05