Megger TDR2000 Manual De Instrucciones página 15

Communications Port:
Batteries:
Eight LR6 (AA) type batteries, manganese-alkali or nickel-
cadmium or nickel-metal-hydride cells.
Nominal voltage: 12V for Alkali or 9.6V for NiCad and NiMH.
Low battery warning occurs at 9.4V (alkali) and 8.56V
(rechargeable).
Battery consumption 150mA nominal, 240mA with backlight
(10/20 hours continuous use depending on backlight
dependency)
Safety:
This instrument meets the safety requirements of IEC 61010
part 1 to 150V cat III. If it is to be used in situations where
hazardous live voltages may be encountered then an additional
blocking filter must be used.
EMC:
Complies with Electromagnetic Compatibility Specifications
(Light industrial)
BS/EN50081-1-1992
BS/EN50082-1-1992
Mechanical
The instrument is designed for use indoors or outdoors and is
rated to IP54.
RS-232C compatible
1 start bit, 8 data bits, 1 stop bit and
no parity, 9 600 baud standard
Case Dimensions: 250 mm long
200 mm wide
110 mm deep
Instrument weight: 1.5kg (3.3lbs)
Case material: ABS
Connectors: Two pairs of 4mm safety terminals.
9 way D-type connector for serial
communication.
Display: 256 x 128 pixel Graphics LCD.
Environmental
Operational Temperature: -15°C to +50°C (5°F to 122°F)
Storage Temperature: -20°C to 70°C (-4°F to158°F)
Operational Humidity: 95% at 40°C (104°F)
Included Accessories
Test and carry Pouch
Miniature Clip Test Lead Set
Carry Strap for Pouch
User Guide
OptionalAccessories
Blocking Filter
6420-114
6231-654
6220-611
6172-446
6220-669
15