Important Information - Avaya Tenovis T3 Basic Manual De Manejo

Important Information

Systems to which the telephone may be connected
This telephone may only be connected to telecommunication systems from
Tenovis. It must not be connected directly to a public telephone network.
Declaration of Conformity
We, Avaya−Tenovis GmbH & Co. KG, declare that the T3 Basic telephone fulfills
the basic requirements and other relevant provisions stipulated in the Directive
1999/5/EU (Radio and Telecommunication Terminal Equipment, R&TTE).
This telephone is designed for connection to analogue ports on Avaya−Tenovis
telecommunication systems and fulfills the basic requirements in compliance with
the EU Directive 1999/5/EU (Radio and Telecommunication Terminal Equipment,
R&TTE). The telephone has not been designed for operation on ports connected to
public telecommunication networks.
If problems occur during operation, please contact the sales outlet where you
purchased the equipment or the Avaya−Tenovis Service department.
The Declaration of Conformity can be viewed at the following Internet address:
www.tenovis.com/deutsch/verzeichis/conformance.htm or search using
"Conformity" as the key word.
Telephone installation location
Place the telephone on a non−slip surface, taking particular care when placing on new
or recently polished furniture. Paints and cleaning agents can contain substances
which soften the footpads of the telephone and the softened footpads could leave
unwanted marks on the surface of furniture. Avaya−Tenovis does not assume liability
for such damage.
Select a location which is protected from direct sunlight.
The telephone is designed for use in rooms indoors with a temperature range from
−10 °C to 50 °C.
Choose an installation location so that even when the telephone cord is at full length,
the telephone cannot be moved to areas subject to moisture, such as bathtub, shower
and wash basin. Prevent it being placed in the vicinity of sources of heat, such as
radiators.
Do not use the telephone in potentially explosive areas. Prevent excessive exposure
to smoke, dust, vibration, chemicals, humidity, heat or direct sunlight.
18