Installation Instructions; Required Tools - Danby DR202WGLP Manual Del Propietário

INSTALLATION INSTRUCTIONS

FOR YOU SAFETY
Do not store or use combustible materials, gasoline
or other fl ammable vapors and liquids in the vicinity
of this or any other appliance.
If you smell gas:
1. Open windows.
2. Do not touch electrical switches.
3. Extinguish any open fl ame.
4. Immediately call your gas supplier.

REQUIRED TOOLS

1. Phillips screwdriver
2. Flat blade screwdriver
3. Pencil and ruler
4. Pipe wrench
5. Open end or adjustable wrench
6. Level
7. Drill, awl or nail
1
2
3
4
5
6
7
MATERIALS YOU WILL NEED
1. Gas-line shut-off valve.
2. Pipe joint sealant or UL-approved pipe thread
tape with Tefl on* that resists action of natural
and LP gases.
3. Flexible metal appliance connector (1/2" I.D.)
A 5 foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing a
new range.
4. Flare union adapter for connection to gas supply
line (3/4" or 1/2" NPT x 1/2" I.D.)
5. Liquid leak detector or soapy water.
6. Lag bolt or 1/2" O.D. sleeve anchor (for
concrete fl oors only).
*Tefl on is a registered trademark of DuPont.
6