Maintenance And Service; Maintenance Plan - Tornado SWB 26/8 Manual Del Usaurio

5 Maintenance and Service

General information
It is essential to pay attention to the information
in Chapter "Safety Information" before
completing any service or maintenance work!
By adhering to the maintenance work
recommended by us, you can be sure that the
machine is always ready to be put into operation.
Maintenance and repair work necessary on a
daily and weekly basis can be carried out by an
operator trained to complete the work, all other
Tornado system maintenance may only be

5.1 Maintenance Plan

System maintenance, customer
The following maintenance work must be
completed by the customer at the intervals
stipulated.
Activity
Check the battery charge; recharge if necessary
Empty the debris container
Clean the brush space
Check the filter in the dust vacuum; clean, if necessary
Check the rotary brush and side brush; clean, if necessary
Check the sweeping pattern; readjust, if necessary
Check the sealing strips on the rotary brush for signs of wear; clean, if
necessary
Check the gasket on the debris container
Check the function of the suction turbine
Check the debris container lock
Test drive and function test
completed by personnel who are correspondingly
qualified and trained.
Please contact your nearest Tornado service
center or Tornado authorized dealer.
Failure to observe this annuls any rights to
claims under the terms of guarantee in respect of
resulting damage or consequential damage.
Always specify the serial number in the case of
inquiries and spare parts orders, refer to section
1.7 - Rating plate.
12
Interval
Daily Weekly
o
o
o
o
o
o
o
o
o
o
o