Safety Information; Safety And Warning Symbols; General Information; Operating Information - Tornado SWB 26/8 Manual Del Usaurio

1 Safety information

1.1 Safety and Warning Symbols

All paragraphs in this manual referring to your
personal safety, the safety of your machine and
Symbol
Safety Provisions
CAUTION
Ecological hazard

1.2 General information


In addition to the information provided

Before starting up the machine for the first
time, read the operating manual supplied
with it thoroughly as well as any separate
manuals provided with additional or
attachment devices and observe all the
information during work.

The equipment may only be operated,
serviced and repaired by personnel trained in
the operation of its use.

Particular attention should be paid to the
information regarding safety. Technical
expertise is the key to preventing errors

1.3 Operating information


Before starting the machine up for the first
time, the battery to be used must be fully
charged, properly, by implementing the initial
battery charge routine. Please pay attention
to the operating manual provided with the
charging unit as well as the manual from the
battery manufacturer.
Tornado assumes no liability for damage to
Hazardous for
persons and goods
the machine
the environment
4
the environment protection are attributed one of
the following warning symbols:
Description
Safety Provisions in dangerous situation
caused by misuse inaccurate adherence
of instructions or prescribed work
routine.
Important information on handling the
machine in order to maintain operability.
Due to use of substances representing
an inherent danger to health of
environment
when operating the machine and ensuring
trouble-free operation.

The operating manual must always be kept
at the operating location of the machine and,
as a result, should be kept in a safe place on
the equipment.

The warning labels attached to the machine
provided important information concerning
safe operation. Illegible or missing labels
must be replaced by new ones.

For reasons of safety, always use original
spare parts.
the battery caused by a fault when the
battery is charged for the first time.

Check the operational safety of the machine
each time before starting it up! Clear any
faults immediately!

Before starting work, the operator must be
fully familiar with all adjustment, operating
and control elements as well as their