Starting Up; Unpacking And Assembling - Tornado SWB 26/8 Manual Del Usaurio

2 Starting Up

2.1 Unpacking and assembling

Open the box, two people are required
to remove the machine from the protective
wrap and place it on the floor.
1. To fix the side brush (Fig 1/1) align the drive
pins on the side brush drive plate and secure
with the wing bolt and washer supplied.
2. Loosen the two knurled screws (Fig. 1/2)
holding the handle a few revolutions until the
handle can be raised and positioned. Set the
handle to a height comfortable for the user
and then tighten the knurled screws.
3. Remove the locking bolt (Fig 1/3) holding
the hood and pivot the hood open.
4. Fix the disassembled cable lug (Fig. 2) to the
corresponding battery contact. It is possible
that sparking will occur when connecting the
batteries!
5. Close the hood and lock in place with the
bolt.
6. The unit is now ready to operate.
Fig 2
Fig 1
Fig 1/1
7
Fig 1/2
Fig 1/3