ECOVACS DEEBOT T9+ Manual De Instrucciones página 25

No. Malfunction
DEEBOT does not start auto-
11 emptying after returning to the
Auto-Empty Station.
DEEBOT fails to auto-empty the
12
Dust Bin.
Possible Causes
The Dust Container Lid is not closed.
The Dust Bag is not installed to the Auto-Empty
Station.
Manually move DEEBOT to the Auto-Empty Station
will not trigger Auto-Emptying.
DEEBOT returns to the Auto-Emptying Station
running Video Manager in the App.
Do Not Disturb mode is enabled in ECOVACS
HOME App.
The Dust Bag is full.
If the possible causes are excluded, it might be a
component malfunction.
The Auto-Empty Dust Bin is not installed.
The Dust Bag is full.
The Auto-Empty Outlets on the Auto-Empty Dust
Bin is stuck by debris.
Dust Evacuation Tube is blocked.
Solutions
Close the Dust Container Lid.
Install the Dust Bag and close the Dust Container Lid.
In order to make sure DEEBOT starts auto-emptying successfully,
avoid picking up and moving the Auto-Empty Station during the
cleaning.
This is normal.
This is normal. Disable Do Not Disturb mode in the App, or start
auto-emptying manually.
Replace the Dust Bag and close the Dust Container Lid.
Please contact customer service.
Please install the Auto-Empty Dust Bin with two Auto-Empty
Outlets on the bottom.
Replace the Dust Bag and close the Dust Container Lid.
Uninstall the Auto-Empty Dust Bin and clean the debris on the
Auto-Empty Outlets.
Clean the Dust Evacuation Tube.
EN
25