Attach The Rail Brackets; Installation; Installation Safety Instructions; Important - Craftsman 139.53925DS Manual Del Propietário

ASSEMBLY STEP 3
Attach the Rail Brackets
• Align rail brackets to end of rail assembly, as shown_
° Insert two 1/4"-20x7/16" hex bolts. Tighten securely with
a 3/8" socket,
You have now finished assembling your garage door
opener. Please read the following warnings before
proceeding to the installation section.
Rail 8rackets
Hex Bolt
114-20x7116"
HARDWARE SHOWN ACTUAL SiZE
Hex Bof_ 114-20x7/16"
iNSTALLATiON
iMPORTANT iNSTALLATiON iNSTRUCTiONS
To reduce the risk of SEVERE INJURY or DEATH:
1, READAND FOLLOW ALL INSTALLATION WARNINGSAND
INSTRUCTIONS.,
2. Install garagedoor opener only on properly balancedand
lubricatedgaragedoor,,An improperly balanceddoor may
not reversewhen required and could result in SEVERE
INJURYor DEATH.,
3, ALL repairsto cables,spring assembliesand otherhardware
MUSTbe madeby a trained door systems technician
BEFORE installing opener.,
4.,DisableALL locks and removeall ropes connectedto garage
door BEFORE installing openerto avoid entanglement
5, Install garagedoor opener7' (2.13 m) or more abovefloor,.
6oMount emergencyreleasehandle6' (1 83 m) abovefloor..
7,,NEVER connectgaragedoor openerto power source until
instructed to do son
8 NEVER wear watches,rings or loose clothing while
installing or servicing opener,. T hey could be caught in
garagedoor or opener mechan[sms_
9. Install wall-mountedgaragedoor control:
• within sight of the garagedoor_
• out of reachof childrenat minimum height of 5' (1 5 m).,
• awayfrom ALL moving parts of the door,
10. Placeentrapmentwarning label on wall next to garagedoor
control,.
11, Placemanualrelease/safety reversetest label in plain view
on insideof garage door,,
12 Uponcompletion of installation,test safety reversal
system, Door MUSTreverseon contact with a 1-1/2"
(3.8 cm) high object (or a 2x4 laid flat) on the floor.
11