bloom fresco Manual Del Usaurio página 20

• Always be sure your child is clear of moving
parts before making any adjustments.
Section C: Highchair mode
– suitable for 6 months to 6 months
(refer to illustrations section c)
WARNINGS:
• WARNING: A CHILD'S SAFETY IS YOUR
RESPONSIBILITY.
• DO NOT LEAVE YOUR CHILD UNATTENDED.
• DO NOT USE THE HIGHCHAIR UNTIL THE
CHILD CAN SIT UP UNAIDED.
• DO NOT USE PRODUCT IF ANY PART IS
BROKEN, TORN OR MISSING.
• WARNING: Keep the highchair away from
open fire, heaters and other sources of
strong heat.
• WARNING: Do not use the highchair unless
all components are correctly fitted and
adjusted.
• Always use the safety harness.
• Make sure harness is correctly fitted before
use.
• Always be sure your child is clear of the
highchair's moving parts before making
adjustments.
• Check the highchair regularly for damage
and to ensure that the harness is secure
and performs correctly. No lubrication is
necessary.
• Always check the tray is securely locked
in place by attempting to pull it free of the
highchair.
• IMPORTANT: Every time you place your
child in the highchair or whenever you alter
the position of the seat, always check that
the harness is correctly fitted. Tighten the
harness until it fits snugly around your child.
c Footrest Assembly and Footrest Adjustment
– (part #07) Slide in footrest until you hear an
audible click. Check footrest is secured by
pulling it downwards.
– To remove footrest, press button located on
the end of the footrest attached to the seat
unit, whilst sliding the footrest out toward the
back of seat unit.
– The footrest has three height positions. Press
the button on the back of the footrest, whilst
sliding footrest up or down to your desired
position. The footrest is locked into position
when you hear an audible click. Check
footrest is secured by pulling it downwards.
c - c4 Safety Bar, Seat Pad & Safety Harness
Assembly
– (parts #05, #06) Put shoulder straps through
the seat pad slits at the desired height setting.
– Put waist straps through the seat pad side slits.
– Place seat pad onto the seat unit; secure onto
velcro.
– (part #10) Behind the seat pad, slide the
buckle on the end of the shoulder straps into
the buckle slots located on the inner face of
seat unit. Check the straps are secured by
pulling on the straps.
– (part #09) Behind the seat pad, pull open the
storage compartment door located on the
eng
5