Before Use; Disassembling The Deep Fryer; First Use - Kalorik USK FT 36673 Manual Del Usaurio

Fax +1 305 430 9692

BEFORE USE

Remove all packaging from the unit.
•
Remove the lid, basket, handle and any accessory from the
•
appliance.
Before you use the deep fryer for the first time, we recommend
•
that you clean the lid, bowl, basket, handle and housing of the
deep fryer with warm soapy water with a soft cloth.

DISASSEMBLING THE DEEP FRYER

Put aside the basket and lid
•
Remove the control panel from the appliance. To do this, gently
•
pull the control panel upwards until it is released.
Take the interior bowl with your two hands and pull it up gently.
•
ASSEMBLING THE DEEP FRYER
Stand the appliance on a dry horizontal surface.
•
Place the bowl back in the housing and push it downwards.
•
Replace the control panel and the accessories. To replace the
•
control panel, gently slide the control panel downward into the
location grooves on the back of the housing until it is locked.
NOTE: The appliance will only operate when the control panel is
correctly fitted into the outer jacket. A safety switch (on the front of
the control box) prevents the function if the control panel is not
assembled correctly.
Insert the pins of the basket handle into the 2 slots in the basket,
•
and then unfold the handle of the basket until it is locked, to
make raising the basket easy.

FIRST USE

When using the appliance for the first time, pour the required
•
amount of oil in the bowl, making sure that the level is between
the MIN and MAX marks indicated inside the bowl.
We recommend that you use liquid oil that is suitable for deep
•
frying. Check the label on the bottle.
If you wish to use a solid fat, cut the fat in small pieces. Plug in the
•
appliance, set the thermostat on the lowest temperature setting
and add the fat pieces slowly. When the fat has melted, set the
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
5
Assembly page 5/40
special instruction from Team
Print only
FT 36673 - 120501