Probe Connection - Gima OXY-100 Guía De Uso

27
When the screen shows icon "
fully charged.
Pulling out the charging cable, then the above icon will disappear.
Safety instruction for operation
Do not throw the battery into the water, liquid and fire.
Keep the battery out of the reach of the child.
Do not disassemble the battery.
The local law should be followed when disposing of the expired device or its
accessories in order to protect environment from being polluted.
Please remove the battery and put it to specified condition if the device will
not be used for a long time.
If the battery is damaged, please replace it with the same model AA alkaline
battery or lithium battery provided by the same manufacturer.
In order to prolong the lithium battery's using life, please pay attention to the
battery maintenance.
3 SpO

Probe Connection

2
Connect the SpO
the Oximeter. After starting up the Oximeter, insert one finger (index finger,
middle finger or ring finger with proper nail length) into the probe according to
the demonstration shown in the following figure.
probe to the connector labeled "SpO
2
Figure 3-1 Demonstration for Using SpO
probe (finger clip)
ENGLISH
", it means the battery is
" at the right side of
2
2