Kohler K-7273 Guía De Instalación Y Cuidado página 4

1.
Cut Pipe with Template - Specified Models
Waste Pipe
Tuyau d'évacuation
Tubo de desagüe
Edge
Rebord
Filo
Cut-Line Template
Gabarit de ligne de découpe
Plantilla de línea de corte
NOTE: It is not necessary to cut the waste pipe and overflow pipe for bath models
K-1152 and K-1153. Proceed to the "Assemble the Drain" section.
Waste Pipe
For Bath Models K-1190, K-1110, and K-1110 variations -AH, -CT, -G, -GCR, -M, and
-V:
Slide the cut-line template over the waste pipe with the edge of the cut-line
template flush against the edge of the waste pipe.
Identify the 4-1/4" (10.8 cm) drain cut line on the cut-line template.
Using a hacksaw, cut the waste pipe at the cut line noted on the cut-line template.
Remove any burrs from the waste pipe.
Overflow Pipe
For Bath Models K-1190, K-1143-L, K-1143-R, K-1110, and K-1110 variations -AH,
-CT, -G, -GCR, -M, and -V:
Slide the cut-line template over the overflow pipe with the edge of the cut-line
template flush against the edge of the overflow pipe.
Determine the appropriate length of the overflow pipe based upon your bath
model. Refer to the text printed on the cut-line template.
Using a hacksaw, cut the overflow pipe at the overflow cut line noted on the
cut-line template.
Remove any burrs from the overflow pipe.
1089145-2-B
Overflow Pipe
Tuyau de trop-plein
Tubo del rebosadero
Cut-Line Template
Gabarit de ligne de découpe
Plantilla de línea de corte
4
Edge
Rebord
Filo
Kohler Co.