Telephone Numbers - Bentel Security B-TEL99 Manual De Instalación Y Usuario

TELEPHONE NUMBERS

The B-TEL99 can store 7 telephone numbers for each alarm channel: each number can have up to 15 digits and one
or more pauses of 1 and/or 5 seconds (e.g. between the area code and the phone number).
Default setting The B-TEL99 has no default telephone numbers.
Programming To program the first number for alarm channel 1 proceed as follows:
Access the programming phase...
a
1 Press
1
2 Press
1
3 Press
again
Wait for the point on the display to start blinking slowly, and then enter the digits of the
4
telephone number. Press
of 5 seconds
c
5 Press
to stepback, and to cancel any wrong digits
e
6 Press
to enter and confirm the telephone number
To store the remaining alarm channel 1 telephone numbers, follow steps 1 and 2 of the previously described procedu-
re, but at step 3 press the key which corresponds to the required telephone number (
Channel 2 To store alarm channel 2 telephone numbers, follow the entire procedure for alarm channel 1, but at point
2
2 press key .
Display To view the stored telephone numbers, follow steps 1, 2 and 3 of the telephone number programming proce-
d
dure, and then press to display, in order, the digits of the telephone number in the selected position; any 1 second
A
pauses will be indicated by
F
If the selected position is empty (no number) the display will show
Erase To erase a stored telephone number follow steps 1, 2 and 3 of the telephone-number programming procedure,
e
and then press to confirm.
PROGRAMMING
a
to enter pauses of 1 second, and
b
and 5 second pauses by .
a
1
1
0
7
a b
7
b 1
to enter pauses
1
4
9
0
c
c
c
e
2 7
through
E
.
-
ð A
ð
1
ð
1
0
7
A b
7
ð
1
1
4
9
0
0
ð
9
4
ð
-
).
35