Long Common Message-Short; Short Common Message - Bentel Security B-TEL99 Manual De Instalación Y Usuario

n n Alarm Channel 2 Short Message - Brief Dedicated Channel 2 Message
The alarm channel 2 message is sent to the programmed telephone numbers when the alarm channel 2 cycle is
triggered.
Record To record the alarm channel 2 message follow the entire recording procedure for the alarm channel 1
message, but at step 3 press key
F
If option "1" is programmed as "Long Common Message" (common to both channels), it will not be possible to
record a message for channel 2.
F
If option "1" is programmed as "Two Dedicated Messages" the maximum recording time will be 16 seconds.
F
If option "1" is programmed as "Short Common Message + 2 brief dedicated messages" the maximum recording
time will be 8 seconds.
Playback To playback the alarm channel 2 message/s follow the entire playback procedure for the alarm channel 1
message/s, but at step 2 press key
n n

Short Common Message

If option "1" is programmed as "Short Common Message + 2 brief dedicated messages", the Short Common Message
will be sent to the programmed telephone numbers, in the event of an alarm on either alarm channel 1 or 2.
Record To record the "Short Common Message" follow the recording procedure of the alarm channel 1 message, but
3
at step 3 press key .
F
If option "1" is programmed as "Long Common Message" (common to both channels) or "Two Dedicated Messages",
it will not be possible to access this phase.
F
If option "1" is programmed as "Short Common Message + 2 brief dedicated messages", the maximum recording
time will be 16 seconds.
Playback To playback the "Short Common Message" follow the playback procedure of the alarm channel 1 message,
3
but at step 2 press key .
DEDICATED MESSAGE 1
DEDICATED MESSAGE 2
BRIEF DEDICATED MESSAGE 1
BRIEF DEDICATED MESSAGE 2
SHORT COMMON MESSAGE
Figure 11 - Alarm message: graphic illustration (see option n. 1)
PROGRAMMING
2
.
2
.
LONG COMMON MESSAGE
16 sec.
16 sec.
8 sec.
8 sec.
16 sec.
32 seconds
1
2
3
37