Option 5) Dial-Tone Check; Option 6) Voice Answer Detection - Bentel Security B-TEL99 Manual De Instalación Y Usuario

To set the required dialling type proceed as follows.
Access the programming phase...
a
1 Press
b
2 Press
4
3 Press
(option number)
Select the required dialling type by pressing one of the following keys:
1 2
= pulse dialling; = DTMF dialling;
4
if pulse dialling is required select
e
5 Press
to confirm and quit
n n

Option 5) Dial-tone check

When this option is disabled, the B-TEL99 will dial the numbers, assigned to the alarm channel in alarm status,
without checking for the dial tone.
If, however, this option is enabled, the B-TEL99 will dial the programmed numbers only when the dial-tone is
detected, otherwise, it will release the telephone line and restart the alarm cycle with the same telephone number:
after 4 attempts the B-TEL99 will abandon the telephone number and step to the successive number.
F
This option must be disabled during the test phase (telephone line disconnected), and also when the B-TEL99 is
connected to telephone networks with non-standard tones.
Default setting The default setting is 1 "Disabled".
To enable/disable proceed as follows.
Access the programming phase ...
a
1 Press
b
2 Press
5
3 Press
Set the dial-tone check ad required by pressing one of the following keys;
1 2
= Disabled = Enabled
4
2
For example, press ...
e
5 Press
to confirm and quit.
n n

Option 6) Voice answer detection

This option may have 3 values:
l
Value [1]: Voice answer detection enabled without redialling of successful calls during the successive cycles.
F
For example, if alarm channel 2 goes into alarm status, and is set for 3 call cycles, the B-TEL99 will call the first
enabled telephone number assigned to alarm channel 2.
With this function mode, if the first telephone number dialled is successful it will not be dialled during the
successive call cycle.
l
Value [2]: Voice answer detection enabled with redialling of successful calls.
F
If the number of call cycles (option 2) is set as 1 there will be no difference between the two above mentioned
settings.
l
Value [3]: Voice answer detection disabled with 5 second message delay after dialling.
Default setting Voice answer detection enabled without redialling of successful calls (value 1).
40
1
.
a
ð
b
ð
4
ð
1
ð
e
ð
a
ð
b
ð
5
ð
2
ð
e
ð
Telephone Dialler B-TEL99
-
A
b
4
1
-
-
A
b
5
2
-