Clone Mode
You can clone radio profiles from a Source radio to a
Target radio by using any one of these four methods:
•
Using a Multi-Unit Charger (MUC– optional accessory)
•
Using two Single Unit Chargers (SUC) and a Radio-to-
Radio cloning cable (optional accessory)
•
Using Wireless PIN cloning
•
Using CPS (free software download)
NOTICE:
Check with Motorola Solutions Authorized dealer for
cloning.
Cloning Radio
1 On the Master Radio, press the Menu/OK →
Advanced → Cloning → Radio Cloning
2 Press the Menu/OK button.
The diplay shows Clone Mode On.
3 Press the Menu/OK button.
The display shows Cloning... on both Master
Radio, and Slave Radio.
If successful:
•
The display shows Cloned Successfully on the
Master Radio.
If unsuccessful:
•
The display shows Cloning Failed on the Master
Radio.
Cloning with a MUC (Optional
Accessory)
To clone radios using the Multi-Unit Charger, you must
obtain at least two radios:
•
a Source radio (radio from which the profiles will be
cloned or copied)
•
a Target radio (radio to which the profiles will be cloned
from the source radio)
The Source radio has to be in Pocket 1 and 2, while the
Target radio has to be in Pocket 4 and 5, matching in
the MUCs pockets by pairs as follows:
English
39