Making A Direct Call; Call All Available - Motorola DTR720 Guia Del Usuario

English
Direct Call to be set up in a special channel. (You can set
up different direct calls in different channels).
NOTICE:
To set up the Direct Call function for the first time in
your radio you must use the CPS (Customer
Programming Software) which is available for free
download at http://www.motorolasolutions.com.
Once in the CPS, you must read and upload the
radio IDs (identified in CPS as "privates") into the
CPS in order to enable Direct Call and assign direct
calls to specific radios. For more information refer to
CPS Basic Menu Instructions on page

Making a Direct Call

1 Press the Programmable button.
The display shows Direct Call Queue message
and that you are in queue.
4
This feature does not interrupt ongoing communications.
28
2 To call, press the PTT button.
The distinctive Private Talk Permit Tone (TPT) is
heard.
3 Wait for the Talk Permit Tone to end and speak.

Call All Available

The Call All Available feature is functional for devices with
more than one channel.
46.
Call All Available feature allows a communication with all
available radio users at once in a temporary "super channel
group", without having to change through each channel
individually. Call All Available is a group call to all users
available on different channels and users who are not
currently tied up in an on-going radio conversation
A user who wants to respond to a Call All Available
transmission should press the PTT button before talking.
If someone initiates a Call All Available transmission, all
users engaged in the Call All Available will have their
Programmable button disabled (no Private Reply or Direct
Call are allowed during this period).
4
.