Cloning The Wireless Profile Id Number - Motorola DTR720 Guia Del Usuario

5 Ensure that the Target radio is turned on.
6 Ensure that the Source radio is in cloning mode.
7 Ensure that the two radios are both from the same
frequency band, and same region.
NOTICE:
This cloning cable is designed to operate only
with compatible Motorola Solutions SUC.
When ordering Cloning Cable Kit, please refer to P/N#
HKKN4028_. For more information about the accessories,
see .
Cloning the Wireless PROFILE ID
Number
The PROFILE ID Number Wireless Cloning feature is
useful when you want to clone the PROFILE ID Number for
all the radios in your fleet but you do not want to clone
particular radio settings that may be unique for each radio
(like Programmable button configuration, Microphone
Gain, Radio Name etc) across. Wireless PROFILE ID helps
to preserve each user radio setup but still ensure that all
radios are under the same PROFILE ID Number. It is also
useful if you do not have a programming cable, or PC
readily available to use for CPS configuration.
1 Power the Target Radio and perform the following
actions:
a Press the Menu/OK → Advanced → Cloning →
Prof. ID Cloning.
b Press the Menu/OK button.
The display shows Profile Clone Mode On.
2 Power the Master Radio and perform the following
actions:.
a Press the Menu/OK → Advanced → Cloning →
Prof. ID Cloning.
b Press the Menu/OK button.
The display shows Profile Clone Mode On.
c Press the Menu/OK button.
The display shows Profile ID Cloning...
If successful:
• The display shows Cloned Successfully.
English
43