Customer Programming Software (Cps); Programming The Radio To Cps; Cps Basic Menu Instructions - Motorola DTR720 Guia Del Usuario

English
Customer Programming
Software (CPS)
To program or change a feature, a CPS must be installed
on a computer.
The CPS allows programming features such as Direct Call,
Private Groups, and Contacts. You are allowed to set up a
password for your radio profile on your CPS for security
purpose.
The CPS software is available for free at
www.motorolasolutions.com/DTR720.

Programming the Radio to CPS

1 To configure the radio using Customer Programming
Software (CPS), place the radio into the Single Unit
Charger (SUC).
2 Connect the CPS Programming Cable one side to
the SUC and another to the computer.
8
Select the Radio Type to open a new or pre-determined the profile. The CPS is automatically determine the radio
model.
46
3 Turn the switch on the CPS Programming Cable to

CPS Basic Menu Instructions

1 Open the Customer Programming Software and click
2 Perform the following actions:
http://
the digital position.
on the RADIO top tab.
a Click on the READ tab to read the radio.
b If you want to open a new profile or an existing
one, from the drop-down menu Radio Type,
select DTR.
8