Table of Contents
- Chevy Camaro 2010-up . .................................................................................. 2-3
Kit Preparation . .....................................................................................................3
- Installing Interface ...............................................................................................7
99-3010S
1. Unclip and remove the (2) side trim
panels running the length of the
center console. (Figure A)
2. Remove (1) 9/32" screw from
each side of the front of the center
console. (Figure B)
3. Remove (2) 9/32" screws per side
from the cover on the back of the
center console then unclip and
remove the cover. (Figure C)
(back)
2
Dash Disassembly
(Figure A)
(Figure B)
(Figure C)