Kit Assembly; Din Head Unit Provision With Pocket; Iso Din Head Unit Provision With Pocket - Metra 99-3010S Instrucciones De Instalación

Ocultar thumbs Ver también para 99-3010S:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

DIN head unit provision with pocket

1. Slide the DIN cage into the radio
housing and secure by bending
the metal locking tabs down.
(Figure A)
2. Snap the pocket into the bottom
opening of the radio housing.
(Figure B)
3. Slide the aftermarket head unit into
the cage and secure. (Figure B)
4. Reassemble dash in reverse order
of disassembly using the 99-3010S
radio trim panel instead of the
factory panel.
5. Programming: You must cycle the
A/C fan speed all the way to high
and back to low when you first
install the kit.

Kit Assembly

(Figure A)
(Figure B)
99-3010S

ISO DIN head unit provision with pocket

1. Mount the ISO brackets to the head
unit with the screws supplied with
the unit. (Figure A)
2. Snap the pocket into the bottom
opening of the radio housing.
(Figure B)
3. Slide the head unit into the radio
opening until the side clips engage.
(Figure B)
4. Snap the trim plate into the
radio housing. (Figure C)
5. Reassemble dash in reverse order
of disassembly using the 99-3010S
radio trim panel instead of the
factory panel.
6. Programming: You must cycle the
A/C fan speed all the way to high
and back to low when you first
install the kit.
4
(Figure A)
(Figure B)
(Figure C)

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido