Dash Disassembly; Kit Preparation - Metra 99-3010S Instrucciones De Instalación

Dash Disassembly

4. Remove (2) 9/32" screws exposed
under the cover on the back of
console. (Figure D)
5. Lift up on the rear of the console
and slide toward the back of the
vehicle then unclip and remove the
entire center console. (Figure E)
6. Remove (2) 9/32" screws securing
the climate control/radio trim panel
and remove. (Figure F)
7. Remove (4) Phillips screws
securing the radio chassis.
(Figure G)
Continue to kit preparation
(Figure D)
(Figure E)
(Figure F)
(Figure G)
99-3010S
1. Cut and remove the sub dash
radio support to make room for the
interface and harnesses. (Figure A)
2. Remove panel clips from factory
radio and attach to the top of the
kit housing. (Figure B)
Continue to kit assembly
3

Kit Preparation

(Figure A)
(Figure B)