Krampouz GGCIO2 Manual De Instrucciones E Instalación Original página 25

Specific connection
In Germany, use the suitable connection below, which is supplied with your appliance:
GGCIR2
- :
GGCIO2
- :
CHANGING THE GAS CYLINDER
Always change the gas cylinder with the control levers and the gas cylinder valve closed,
in a well-ventilated area, away from any source of heat (cigarette, electrical appliances,
etc.).
We recommend using commercial 6 kg or 13 kg butane or propane gas cylinders using an
appropriate pressure regulator.
Whenever you change the gas cylinder, perform a leak-tightness test.
STARTING UP
Connect the appliance to the supply source using a gas pipe in line with currently
enforced European standards and requirements.
Use a hose meeting the normative specifications of your country.
Check that your pipe or hose is not in contact with parts of the appliance which are likely
to become hot.
The container supplied with your appliance is for recovering cooking juices, and must
be handled when the appliance is cold.
KRAMPOUZ cannot accept liability for damage caused to objects or persons resulting
from improper installation or use of the appliance.
- 25 -