Connections; Power Cable; Video Output Cable (Bnc); Test Monitor Output (Mon.OUt) - Ikegami Hyper Wide Dynamic ISD-A35S Manual De Instruccions

6. Connections

Be sure not to apply power before making connections.

6-1. Power cable

Use DC12V (10.5V to 15V), or AC24V (± 10%) in both 60Hz and 50Hz.
* This installation should be made by a qualified service person and
should conform to all local codes.

6-2. Video output cable (BNC)

This is a video output terminal. To be use an ordinary video output, for
monitors, or switcher.

6-3. Test monitor output (MON.OUT)

• Image output terminal used when installing the camera.
• By using the accessory cable to connect to the VIDEO IN of the monitor
or the image input terminal, it is easier to carry out positioning and
focusing.
E-6