Angle And Lens Adjustment; Angle Adjustment; Vari-Focal Lens Adjustment - Ikegami Hyper Wide Dynamic ISD-A35S Manual De Instruccions

7.

Angle and Lens adjustment

7-1. Angle adjustment

Before doing this, the dome cover has to be removed.
● Remove the dome cover
This is done by loosening the three fixing screws of
the dome cover, by the supplied L-form wrench.
Note: When imaging in a horizontal direction, the
black section of the dome cover may be
imaged so that part of the image is missing.
Adjust the angle of vision in a horizontal
direction so that the dome cover is not
imaged.

7-2. Vari-focal lens adjustment

To re-direct lens, loosen the lens fixing screws for rotation and for elevation.
Adjust the zoom knob for framing and angle, and a focus knob for focusing.
Using those two knobs, adjust the lens to have desired framing, angle
and focal point. Repeat this procedure a couple of times, so that you may
achieve the best result.
Once the desired settings have been achieved, tighten the screws to fix
the position.
Zoom knob
Focus knob
E-7