Kohler K-408 Manual Del Usuario página 10

Collar (with flange up)
Mounting Nut
Auxiliary Shower Outlet Port
Bath outlet Port
6. Complete the Valve Installation
Remove the plaster guard.
Turn on the main water supply.
Confirm proper operating of the transfer valve and associated
fittings.
Carefully inspect the entire installation for leakage and proper
operation. Adjustment as needed.
Hand tighten the plated nut to the brass body.
NOTE: If the trim will not be installed immediately, reinstall the
plaster guard.
Install the trim according to the instructions packed with the
product.
7. Installation Checkout
Complete the installation of the valve, valve trim and any other
components according to the instructions packed with the
product.
Ensure all connections are tight.
Open the drain.
Turn on the main water supply and check for leaks. Repair as
needed.
086847-2-AC
Plaster Guard
Cartridge
Plated Nut
Brass Body
Washer
Handshower Outlet Port
Cap
Mixed Water Inlet Supply Port
10 Kohler Co.