Kohler K-408 Manual Del Usuario página 3

Before You Begin (cont.)
IMPORTANT! A main valve must be installed upstream from the
diverter valve for shut off and temperature control.
Observe all local plumbing and building codes.
Shut off the main water supply.
Provide an access panel for all installations.
Carefully read this entire instruction manual before beginning the
installation; the illustrations do not show all possible
configurations.
For K-408: This valve can be installed to decks with a maximum
thickness of no more than 1-7/16" (3.7 cm).
For K-409: This valve can be installed to decks with a maximum
thickness of no more than 3-7/16" (8.7 cm).
The transfer valve is pre-assembled with a grey three-way stop
collar for three-way connections. To convert the valve for
two-way configurations, follow the instructions for changing the
grey collar to the black two-way stop collar.
The transfer valve contains an integral vacuum breaker.
Do not install handheld shower units on the bath outlet.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
Kohler Co. 3 086847-2-AC