Wayne Dalton 8000 Instrucciones De Instalación Y Manual Del Usuario página 26

18
Adjusting Top Brackets
Tools Needed: With tracks installed you can adjust the
top brackets. Vertically align the top
7/16" Wrench
section with the lower sections. Once
aligned, position top roller in adjustable
slide against horizontal track to maintain
position and tighten nut. Repeat for
other side.
19
NOTE: Doors with Keyed lock do not require this lift
Tools Needed:
handle.
Tape Measure
Raise the door to a comfortable working height and
Pencil
secure with vice clamp to the track. Locate the inside
center stile or the desired lift handle location on the lock
(2nd) section of the door.
Power Drill
Measure up 4 inches from the bottom of the second
9/32" Drill Bit
section. Using this measurement as a guide, position
lift handle bottom hole and make a mark at the top hole
1/2" Drill Bit
in lift handle. This should give you a Min. of 20 in. and
a Max. of 30 in. between the lower lift handle/gripping
1/4" Wrench
point and the middle of the upper lift handle/gripping
point. If needed reposition upper lift handle to stay within
Min. and Max. dimension.
Drill two 9/32 in. (8mm) dia. holes through section.
Enlarge the holes from outside the door to 1/2" (13mm)
dia.
NOTE: Do not drill through or enlarge holes on the inside
of the door.
Assemble the outside and inside lift handle/gripping
points to the section using (2) 1/4" x 2 1/2" carriage
bolts, (2) 1/4"- 20 hex nuts and (2) spacers.
26
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
CORRECT
INCORRECT
Lift Handle
TOP
SECTION
TOP
SECTION
TOP
SECTION
LOCK
SECTION
LIFT
HANDLE
(2) SPACERS
(2) 1/4" X 2-1/2"
BOTTOM
CARRIAGE BOLTS
SECTION
LIFT HANDLE OUTSIDE
LOCK
SECTION
LIFT
(2) 1/4"- 20
HANDLE
HEX NUTS
BOTTOM SECTION
LIFT HANDLE INSIDE
HORIZONTAL
TRACK
TOP ROLLER
TOP BRACKET
SLIDE
LOCK
SECTION
LIFT
HANDLE
BOTTOM
SECTION
LOCK
SECTION
LIFT
HANDLE
BOTTOM
SECTION