Microsonic TEL8018C Manual De Instrucciones página 33

AM/PM by the same way.
After select the alarm time, press SET/OK key, the user will be presented with a further option to
6)
select to SNOOZE ON or SNOOZE OFF to enable or disable the snooze function on the alarm.
Press SET/OK key to confirm your selection.
7)
8) When the alarm is set, the
Startup alarm:
In standby mode, the alarm will ring at very sharp time you have set.
Intermit alarm:
During the alarming, you can switch it off by pressing any key of the handset, or when a call comes, the
alarm will be intermitted too.
Close alarm:
Re-enter the alarm setting menu option and select OFF.
NOTE: 1. If the SNOOZE is set ON, the alarm will be repeated about every 5 minutes for about an hour, with
the alarm icon continuing to flash. During the alarming, press any key except
alarming, and will begin to ring after 5 minutes.
2. If the SNOOZE is set OFF, the alarm will sound for 45 seconds once.
To adjust handset ringing melodies and volume
The user is able to change the handset ringing on internal calls and external calls. There are 10 ringer
melodies and 5 different volume levels can be set.
Press SET/OK key, then using ∧ or ∨ key to select RING SETUP item.
1)
Press SET/OK key to enter.
2)
Press ∧ or ∨ key to select the INT RING and EXT RING setup.
3)
Press SET/OK key to confirm.
4)
Press ∧ or ∨ key to select the MELODY and VOLUME setup.
5)
If select MELODY,
Press SET/OK key to confirm.
a)
Press ∧ or ∨ key to select desired melody, the corresponding melody sound can be heard
b)
with the selection.
Press SET/OK key to confirm your selection.
c)
If select VOLUME,
Press SET/OK key to confirm.
a)
Press ∧ or ∨ key to select desired ringer volume 1- 5, the corresponding volume sound can
b)
be heard, if you want to switch off select OFF.
Press SET/OK key to confirm your selection.
c)
Notes：
If you select ring OFF for INT RING, when transfer call to this unit, it will not ring;
1.
If you select ring OFF for EXT RING, there will be a ringing off icon
2.
an incoming call, the handset will not ring.(Shortcut key: press and hold
external call ring on/off)
To set handset tones
The user is able to change the handset tone settings.
will appear on the top of the display.
11
key to intermit
display on LCD and when there is
key to switch the handset