Microsonic TEL8018C Manual De Instrucciones página 35

0000).
Press SET/OK key to confirm, then using ∧ or ∨ key to select ON or OFF, press SET/OK key to
3)
confirm.
If select ON, the display shows NUMBER 1, press ∧ or ∨ to choose NUMBER i (i=1~4).
4)
Then press SET/OK to confirm, and the display shows NUMBER i (i=1~4), using the numerical key
5)
to input numbers (maximum 4 digits) you want to barring.
Press SET/OK key to confirm.
6)
7) Repeat the above steps to set the rest of 3 groups.
To set time and date
The user is able to set the date and time on the handset, by selecting the following option.
Press SET/OK key. Using ∧ or ∨ key to select DATE&TIME
1)
Press SET/OK key and the last two digits of the year flashes.
2)
Edit the year by pressing ∧ or ∨ key. Then use SET/OK key to confirm and enter the month value
3)
setting.
4) Using the same method for month, date and time setting.
Notes:
1. The date and time will be automatically set when the first caller ID message is received.
2. When the unit is powered on initially, the date and time will be blinking, please to set the date and time
first according to use above methods.
CONTRAST
The user is able to set the contrast of the LCD display, by selecting the following options.
Press SET/OK key to enter LCD display contrast settings.
Press SET/OK key. Using ∧ or ∨ key to select CONTRAST,
1)
Press SET/OK key to confirm, then press ∧ or ∨ key to select from 1-8 levels.
2)
To select a base
The handset can be registered to more than one base (up to a maximum of 4), and you can select which
base you want the handset to operate with.
If you select "AUTO", the handset will link with the first of the registered bases that it finds.
Press SET/OK key, then using ∧ or ∨ key to choose SELECT BASE.
1)
Press SET/OK key and the LCD displays BASE 1 + .
2)
Press ∧ or ∨ to select base (BASE 1~4) or AUTO.(Note: the handset will only link with base
3)
number followed by a "+")
Press SET/OK to begin searching, if you hear a sound of "di-du-di", means linked successful.
4)
To default handset settings :
This function allows the user to restore the handset settings to the factory default.
Note: the CID and outgoing calls lists will be cleared, the phonebook and TAM settings will not be changed.
Press SET/OK key, then using ∧ or ∨ key to select HS DEFAULT item.
1)
Press SET/OK key to confirm.
2)
The display shows PIN?, then key in the PIN code (the default pin code is 0000).
3)
Press SET/OK key to confirm, if the PIN code is validated all handset settings will be returned to the
4)
factory default.
13