Auto Answer - Microsonic TEL8018C Manual De Instrucciones

Press SET/OK key, then using ∧ or ∨ key to select TONE SETUP item.
1)
Press SET/OK key to enter.
2)
Press ∧ or ∨ key to select the KEY TONE and BATTERY LOW, RANGE ALARM setup.
3)
Press SET/OK key to confirm.
4)
Press ∧ or ∨ key to select the ON or OFF to enable/disable the sounding of a beep respectively.
5)
Press SET/OK key to confirm your selection.
6)
Notes:
1. If you turn the tone on for key tone, a beep for key tone will sound when a key is pressed on the handset.
2. If you turn the tone on for battery low warning, a beep will sound when the battery is low.
3. If you turn the tone on for the out of range warning, a beep will sound when the handset goes out of range
of the base unit.
To select handset display language
Press SET/OK key, then using ∧ or ∨ key to select LANGUAGE item.
1)
Press SET/OK key to enter. First display is ENGLISH.
2)
Press ∧ or ∨ key to select the language from ESPAÑOL (Spanish), ENGLISH (English), DEUTSCH
3)
(German), FRANÇAIS (French), ITALIANO (Italian), PORTUGUES (Portuguese), PYCCKNÑ
(Russian), TÜRKÇE (Turkish), EΛΛHNIKA (Greek), YKPAIHCЬKNÑ (Ukrainian), POLSKI (Polish),
MAGYAR (Hungarian), SVENSKA (Swedish), NEDERLANDS (Dutch), DANSK (Danish) and
NORSK (Norwegian). Each language will display in its own native translation.
Press SET/OK key to confirm your selection.
4)
To change the handset name
The operation will allow the user to change the handset name
Press SET/OK key. Using ∧ or ∨ key to select HS NAME
1)
Press SET/OK key, and the display will show a flashing cursor on the name line.
2)
3) Key in the handset name.
If you make a mistake, press R/C key to correct.
4)
Press SET/OK key to confirm.
5)
To turn on/off auto answer
The Handset can be set to answer an incoming call automatically by simply pick it up from the charging
cradle. The user is able to select to enable/disable this auto answer feature.
Press SET/OK key. Using ∧ or ∨ key to select AUTO ANSWER
1)
Press SET/OK key to enter.
2)
Press ∧ or ∨ key to select ON or OFF
3)
Press SET/OK key to confirm your selection. Exit from this sub-menu and return the user to the
4)

AUTO ANSWER

To set handset call barring function
You can set 4 numbers (up to 4 digits each) for call barring.
When the call barring is "ON", any numbers beginning with the programmed digits will not be able to be
dialed out, and LCD will display CALLS BARRED
Press SET/OK key. Using ∧ or ∨ key to select BARRING
1)
Press SET/OK key the user will be prompted to enter the PIN code, input 4-digit code (defaulted as
2)
12