Publicidad
Idiomas disponibles
Idiomas disponibles
ISO DIN radio provision with pocket
1. Clip the (2) small pockets into the
99-3017B radio trim panel.
2. Attach the (9) metal panel clips to
the 99-3017B radio trim panel.
3. Attach the a/c vents to the
99-3017B radio trim panel with
the factory hardware.
4. Secure the radio brackets to the
pocket with (4) #8 x 3/8" Phillips
screws supplied. (Figure A)
5. Remove the metal "DIN" sleeve and
trim ring from the aftermarket radio.
6. Secure the radio to the completed
assembly using the screws
supplied with the radio. (Figure B)
Kit Assembly
(Figure A)
(Figure B)
99-3017B
7. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
8. Mount the new radio assembly into
the dash and reassemble the dash
in reverse order of disassembly
using the 99-3017B radio
trim panel.
3
Publicidad
