AllPondSolutions EF1+ Manual De Instrucciones página 4

Filtros externos para acuario
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

MAINTENANCE
We recommend that a regular cleaning and maintenance schedule is
followed to ensure responsible fishkeeping. Depending on water
volume and stocking levels, regular cleaning of the filter media,
foams, impeller, inlet/outlet pipework during a 10-25% water change
will help ensure that the product works efficiently and the aquarium
remains healthy.
Impeller and Shaft
To access the impeller and shaft:
Pull up the EF tap handle to shut off the water flow to the EF, pull
1
the EF tap away from the filter head.
Unclamp all four head and body clips and separate the filter head
2
from the filter body.
Twist and remove the impeller cap located on the underside of the
3
filter head and gently remove the impeller and shaft.
Check the condition of the impeller and shaft and clean using your
aquarium water. Clean inside the impeller housing and ensure the
shaft rubbers are in place at both
ends before replacing.
If the impeller and shaft have
visible damage contact your local
retailer to purchase replacements.
Reverse the above steps to replace.
Filter Media
We recommend installing the supplied filter media in the
following order: ceramic rings in the bottom basket, bio balls in the
middle basket and activated carbon in the top basket.
Ceramic rings and Bio balls are long lasting media and can be rinsed
clean with aquarium water as part of a regular cleaning schedule.
We recommend replacing Activated carbon at least every 3-6 months.
/
EFX+

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ef2+Efx+Ef1

Tabla de contenido