DISPLAY ICONS 706 CONTROLLER
NOTE: In normal operation and during
programming, only a few of the icons will
actually be displayed.
1.
Indicate water flow when displayed. Arrows
alternate faster as flow increases.
2.
"PM" indicates that the time displayed is
between 12:00 noon and 12:00 midnight
(there is no am indicator).
3.
When "MIN" is displayed, the value is in
minute increments. "MIN" is displayed
during recharge, the value displayed is the
minutes of recharge remaining.
4.
Colon flashes as part of the time display.
Indicates normal operation.
5.
Four digits used to display the time or
program value. Also used for error codes.
29 • 1/12
8
1
x2
6
7
Figure 17 Display Icons
4
5
Figura 17 Íconos de pantalla
6.
The recycle sign is displayed (flashing)
when a recharge at the next time of
recharge has been called for. Also
displayed (continuous) when in recharge.
7.
When "x2" is displayed, a second recharge
has been called for.
8.
The hourglass is displayed when the motor
is running.
9.
X100 multiplier for large values.
NOTE: During normal operation (Service mode)
the display will show the current time of day
with the colon blinking. This will alternate with
a display of the gallons remaining to be treated
before recharge.
2
PM
MIN
3
X100
9