Accessing History Values - Aquanex AQU36 Manual Del Propietário

ACCESSING HISTORY VALUES

Accessing History Values
The 706 control features a review level that
displays the operation history of the system.
This is a great troubleshooting tool for the
control valve.
To access history values, press Recharge
followed by the Salt Amount button and hold for
3 seconds to view the Diagnostic Codes.
NOTE: If a button is not pushed for 30 seconds
the controller will exit the history table.
Press the Time of Day button to increment
through the table. When the desired code
is reached, Press the Salt Amount button to
display the value.
When the Salt Amount button is pressed to view
H2 the current flow rate will be displayed but not
updated. Continue to press and release the Salt
Amount button every 5 seconds to update the
display. The flow icons on the display will flash
when there is flow thru the softener.
43 • 1/12
Code Description
H1 Days since last
recharge
H2 Current flow rate
H3 Current day of week
H4 Water used today
since 0200
H5 Water used since last
recharge
A0 Average water usage
for day 0
A1 Average water usage
for day 1
A2 Average water usage
for day 2
A3 Average water usage
for day 3
A4 Average water usage
for day 4
A5 Average water usage
for day 5
A6 Average water usage
for day 6
Notes
Days since last
recharge
Gallons per minute
Current day of
week
In gallons,
max value
displayed 9999
max value stored
65,535.