•SCENES•
The Q12 can store 120 static scenes of any combination of the twelve channels and their associated
levels. Scenes are stored across ten pages of memory. Each page of twelve scenes is selected by means of
the rotary PAGE selector switch. Each scene within the page is accessed, either by its associated slider or
its flash button.
TO PROGRAM A SCENE
1. Select PROGRAM. Note that both the SCENE and CHASE LEDs flash.
2. Press the SCENE button and the CHASE LED goes off.
3. Move the A sliders to the desired levels.
4. Set the rotary page selector as required and press one of the twelve 'flash' buttons to select a memory
page and a position on the page where the scene will be stored.
5. Either
Program another scene by moving the sliders, selecting the page and pressing the 'flash' button
Or
Exit programming mode by selecting RUN.
TO MODIFY A SCENE
1. Having already recalled the scene, select MODIFY. The SCENE LED flashes.
2. Press SCENE.
3. Select the scene using the rotary page switch and the appropriate 'flash' button.
4. Change the level in any channel by moving the appropriate A slider to the same level as that channel
has within the scene you are modifying. The channel will 'lock on' and follow the slider movements, allow-
ing you to change the level of the channel.
5. Select RUN. The modifications have been saved.
3