LightProcessor Q 12 Manual De Instrucciones página 5

SUB-MASTERS - RECALLING PROGRAMMED SCENES
Whereas, in manual operation the B sliders control the level of individual channels, in scene mode they act
as sub-masters and recall pre-programmed scenes. Twelve scenes may be recalled at any one time. Press
the SCENE button so that the LED lights, then operate the B sliders to recall scenes at the desired level.
Alternatively, scenes may be recalled at 100% of their programmed levels by means of the flash buttons.
See OPTIONS section for details of how to set up the flash buttons to recall scenes.
A slider must be returned to its zero position before it can recall a scene in the same position from anoth-
er page.
Whenever scenes from two or more pages have been selected, the MIX LED flashes.
COPYING SCENES
Scenes (sub-masters) may be copied to other positions within the ten pages by using the COPY TO
button.
1. Hold down the COPY TO button and select MODIFY.
2. Release the COPY TO button.
3. Select the page from which you will copy.
4. Hold down the 'flash' button of the scene to be copied, press COPY TO and release both buttons
together.
5. Select the page to which you wish to copy and press the 'flash' button of the new location.
6. Select RUN when you have finished copying.
Q
12
4